| T O P I C R E V I E W |
| jebus |
Posted - 22/09/2012 : 20:39:55
Hey guys, just doing some final testing b4 i put a snake or 5 anywhere
near my rack :P. I am currently using aspen bedding inside the rubs, using jsut enough to cover the bottom, though the heat reading ontop of the aspen is around 29degre c and when i push it to the side to read the plastics temp its around 35 give or take half a degree. So my question is should i take the heat reading from the base of the rub itself? If that makes sense...
Thanks, Matt |
| 1 L A T E S T R E P L I E S (Newest First) |
| Evolution Morphs |
Posted - 22/09/2012 : 20:45:00
Yes from the base without bedding on it
Just move some aspen for a while then check the temp
The aspen will heat the bottom of the rub up
So you won't get a true reading |
|
|
