The Royal Python Forum
The Royal Python Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Royal Python Posts
 General Posts
 Rack temps
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

carlb1981
Fully Grown Royal

United Kingdom
1527 Posts

Posted - 20/09/2012 :  20:11:29  Show Profile  Visit carlb1981's Homepage  Reply with Quote
I've got my rack up and running now with 3 x 35"x6" heat strips and 1 habistat pp stat have used one rub just for the stat probe and also put a thermometer on it which is reading 32.5 degrees but my other rubs are reading higher at 33 and over the only difference with the others is they have a hide in over the thermometer probe is this normal to have different temps? Also wish id gone for the 11" wide strips as the heated part of the heat strip is not 6" as i thought would be the case and the plastic bit where the cable is takes up part of that too for my middle rub :-(

3.3.0 Royals,Yellow Belly -Marty,Fire YB-Fred,Mojave-Mo,Butter Pinstripe-Betty,Pewter-Newt,Normal-Molly
0.1.0 Snow Cornsnake- Lumi
1.1.0 Hypo Sonoran Dwarf Boa-Bart and Maggie
0.1.0 Albino Pine Snake-Ruby
1.0.0 Bredli Python-Brian
1.0.0 Western Hognose-Hal
1.0.0 Kayuadi Retic-Kaa
0.1.0 Honduran Milksnake-Jubbly
1.1.0 Salmon Boas-Hershey and Sam
0.2.0 Leopard Geckos-Spot and Chocolate
1.4.0 Dune Geckos
0.1.0 Beardie-Cookie
0.3.7 Tarantulas
0.0.1 Pandinus Imperator/emperor scorpion

Danno91
Sub Adult

United Kingdom
521 Posts

Posted - 20/09/2012 :  20:15:18  Show Profile  Click to see Danno91's MSN Messenger address  Reply with Quote
Thermometers generally won't match all mine say there could vary +/-1'c on the back

http://www.facebook.com/DannosRoyalPythons?ref=hl
Go to Top of Page

Evolution Morphs
Old Royal - I Post too much!

United Kingdom
2265 Posts

Posted - 20/09/2012 :  20:19:48  Show Profile  Visit Evolution Morphs's Homepage  Reply with Quote
I'd recommend a ir temp gun for doing the temps
I think you may fine all will be the same
Give or take 0.5 degree

I only use the ir temp gun
Think there about £12-£15 on eBay
Saves buying multi thermostats


now on facebook

Royal Pythons
http://www.facebook.com/EvolutionMorphs

Western Hognose
Go to Top of Page

carlb1981
Fully Grown Royal

United Kingdom
1527 Posts

Posted - 20/09/2012 :  20:48:20  Show Profile  Visit carlb1981's Homepage  Reply with Quote
I have an ir gun but to check the rubs in my rack id have to take them out and they'd cool

3.3.0 Royals,Yellow Belly -Marty,Fire YB-Fred,Mojave-Mo,Butter Pinstripe-Betty,Pewter-Newt,Normal-Molly
0.1.0 Snow Cornsnake- Lumi
1.1.0 Hypo Sonoran Dwarf Boa-Bart and Maggie
0.1.0 Albino Pine Snake-Ruby
1.0.0 Bredli Python-Brian
1.0.0 Western Hognose-Hal
1.0.0 Kayuadi Retic-Kaa
0.1.0 Honduran Milksnake-Jubbly
1.1.0 Salmon Boas-Hershey and Sam
0.2.0 Leopard Geckos-Spot and Chocolate
1.4.0 Dune Geckos
0.1.0 Beardie-Cookie
0.3.7 Tarantulas
0.0.1 Pandinus Imperator/emperor scorpion
Go to Top of Page

Evolution Morphs
Old Royal - I Post too much!

United Kingdom
2265 Posts

Posted - 21/09/2012 :  07:36:44  Show Profile  Visit Evolution Morphs's Homepage  Reply with Quote
be quicker lol

i have 6" heat mats and there near enough same temp give or take 0.5c
they sit at 32.5c-33.c


now on facebook

Royal Pythons
http://www.facebook.com/EvolutionMorphs

Western Hognose
Go to Top of Page

carlb1981
Fully Grown Royal

United Kingdom
1527 Posts

Posted - 21/09/2012 :  13:58:51  Show Profile  Visit carlb1981's Homepage  Reply with Quote
So in theory if i use my ir gun to check mats if they are between those temps my rubs Will be fine? Im using kitchen roll instead of aspen

3.3.0 Royals,Yellow Belly -Marty,Fire YB-Fred,Mojave-Mo,Butter Pinstripe-Betty,Pewter-Newt,Normal-Molly
0.1.0 Snow Cornsnake- Lumi
1.1.0 Hypo Sonoran Dwarf Boa-Bart and Maggie
0.1.0 Albino Pine Snake-Ruby
1.0.0 Bredli Python-Brian
1.0.0 Western Hognose-Hal
1.0.0 Kayuadi Retic-Kaa
0.1.0 Honduran Milksnake-Jubbly
1.1.0 Salmon Boas-Hershey and Sam
0.2.0 Leopard Geckos-Spot and Chocolate
1.4.0 Dune Geckos
0.1.0 Beardie-Cookie
0.3.7 Tarantulas
0.0.1 Pandinus Imperator/emperor scorpion
Go to Top of Page

diamond royal
Snake Mite

United Kingdom
36 Posts

Posted - 21/09/2012 :  18:06:37  Show Profile  Reply with Quote
dont need 11" mate, all my racks are 6", more than enough, heat cable is only 10mm wide and with 2x passes thats anough for the racking systems.

and .5 of a degree is neither here or there mate, no worries with that.

in my humble opinion anyways...

Guardian.reptile.logistics@hotmail.co.uk
Go to Top of Page

carlb1981
Fully Grown Royal

United Kingdom
1527 Posts

Posted - 21/09/2012 :  19:16:04  Show Profile  Visit carlb1981's Homepage  Reply with Quote
Trouble is mine is more than 2 degrees difference i know its not the thermometer as I've swapped tubs around and the read the same as the tub that was there originally and I've checked the mats now with my ir gun and it seems as though they aren't heating evenly is this normal? The temps so far are 12l ones first the one with stat probe is 32.5c then there's one at 31.8c and the other at 33.4c and the two without stat probe are on same shelf then i have a 50l one reading 30.5c on another shelf

3.3.0 Royals,Yellow Belly -Marty,Fire YB-Fred,Mojave-Mo,Butter Pinstripe-Betty,Pewter-Newt,Normal-Molly
0.1.0 Snow Cornsnake- Lumi
1.1.0 Hypo Sonoran Dwarf Boa-Bart and Maggie
0.1.0 Albino Pine Snake-Ruby
1.0.0 Bredli Python-Brian
1.0.0 Western Hognose-Hal
1.0.0 Kayuadi Retic-Kaa
0.1.0 Honduran Milksnake-Jubbly
1.1.0 Salmon Boas-Hershey and Sam
0.2.0 Leopard Geckos-Spot and Chocolate
1.4.0 Dune Geckos
0.1.0 Beardie-Cookie
0.3.7 Tarantulas
0.0.1 Pandinus Imperator/emperor scorpion
Go to Top of Page

diamond royal
Snake Mite

United Kingdom
36 Posts

Posted - 03/10/2012 :  17:39:19  Show Profile  Reply with Quote
you will find that in a rack system that the top rubs will be slightly warmer than the lower rubs.

my racks are 10 high, and the stat probe is in the middlish and the top is a degree hotter than the bottom.
unless you have several stats for each level, you willnot get around it, as heat rises.

and a couple of degrees isnt an issue, the lower rubs at 87/88, and the top rubs 89/90, no problems with that.

Guardian.reptile.logistics@hotmail.co.uk
Go to Top of Page

carlb1981
Fully Grown Royal

United Kingdom
1527 Posts

Posted - 03/10/2012 :  18:31:54  Show Profile  Visit carlb1981's Homepage  Reply with Quote
Mine seem to be the other way around warmer rubs on shelf with probe then the two shelves above are cooler the one directly above is between 1 and 2 degrees cooler and the top one which has no rubs on yet or heat reflective stuff is reading about 29 degrees directly checking mat and it seems the mats don't heat evenly when checked with ir temp gun in different spots

3.3.0 Royals,Yellow Belly -Marty,Fire YB-Fred,Mojave-Mo,Butter Pinstripe-Betty,Pewter-Newt,Normal-Molly
0.1.0 Snow Cornsnake- Lumi
1.1.0 Hypo Sonoran Dwarf Boa-Bart and Maggie
0.1.0 Albino Pine Snake-Ruby
1.0.0 Bredli Python-Brian
1.0.0 Western Hognose-Hal
1.0.0 Kayuadi Retic-Kaa
0.1.0 Honduran Milksnake-Jubbly
1.1.0 Salmon Boas-Hershey and Sam
0.2.0 Leopard Geckos-Spot and Chocolate
1.4.0 Dune Geckos
0.1.0 Beardie-Cookie
0.3.7 Tarantulas
0.0.1 Pandinus Imperator/emperor scorpion
Go to Top of Page

diamond royal
Snake Mite

United Kingdom
36 Posts

Posted - 04/10/2012 :  22:53:18  Show Profile  Reply with Quote
i have also nboticed when rubbing hand across mats, the heat isnt perfectly even on the mats.

Guardian.reptile.logistics@hotmail.co.uk
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
The Royal Python Forum © THEROYALPYTHON.co.uk Go To Top Of Page
Snitz Forums 2000