| Author |
 Topic  |
|
|
viperflea
Hatchling
United Kingdom
51 Posts |
 Posted - 19/04/2012 : 22:15:26
|
Hi guys.
I have a problem with temperature in my viv. For quite a while it was fine with the basking side at 31 deg and cool end at 28 - 28.5 deg. I have replaced the bulb as the previous one quit on me. I now can't seem to get the variation. The viv is at 30 deg both ends and I can't seem to balance it to give a cool end. I've tried keeping a small gap in the left hand glass door and this seems to work but this messes with the humidity levels. Can anyone offer some advice.
Thanks. |
Viperflea
ROYAL PYTHON - Monty |
|
|
n/a
deleted
7384 Posts |
Posted - 19/04/2012 : 22:22:19
|
| Is the bulb statted? |
|
 |
|
|
viperflea
Hatchling
United Kingdom
51 Posts |
Posted - 19/04/2012 : 22:24:30
|
| Yep the bulb is statted. I also have digital temp sensors at both ends. |
Viperflea
ROYAL PYTHON - Monty |
|
|
|
n/a
deleted
7384 Posts |
Posted - 19/04/2012 : 22:59:52
|
| Ha -that's a bit of a mystery then, unless the ambient temp of your room has been upped by spring sunlight/radiator. where in the viv does the royal like to sleep? |
|
|
|
|
viperflea
Hatchling
United Kingdom
51 Posts |
Posted - 19/04/2012 : 23:19:41
|
| He has his hide on the warmer side and occasionally goes to his shedding/humidity box on the cooler side. It is a mystery. Only thing I can think of is the bulb is larger. Not in wattage but size ???? Also do u help your snake if it's shed but not all come off?? |
Viperflea
ROYAL PYTHON - Monty |
|
|
|
viperflea
Hatchling
United Kingdom
51 Posts |
Posted - 19/04/2012 : 23:20:48
|
| Wouldnt the ambient temp in the room still keep the temp variation ?? |
Viperflea
ROYAL PYTHON - Monty |
|
|
|
Fezza
Fully Grown Royal
United Kingdom
1063 Posts |
Posted - 20/04/2012 : 07:43:15
|
Are you still using the same type of bulb i.e. incandescent or ceramic? I switched to a ceramic and it took a few goes to get thing set right again.
If the bulb is the same type, can you still get the same make as the bulb you had before? Mite be worth going back to what you know best |
1.0.0 normal royal
1.0.0 mojave royal
1.0.0 pastel enchi royal
0.1.0 cinnamon royal
0.1.0 pewter royal
0.1.0 genetic stripe royal
0.1.0 lesser goblin royal
0.1.0 phantom royal
0.1.0 Columbian rainbow boa
0.0.1 aru x jaya GTP
0.1.0 bredli
1.0.0 trans pecos rat snake
1.0.0 fat black cat
 |
|
|
|
n/a
deleted
7384 Posts |
Posted - 20/04/2012 : 10:39:33
|
Hi - I can recommend this for the stuck shed -
http://www.theroyalpython.co.uk/forum/topic.asp?TOPIC_ID=8324&SearchTerms=the+pillowcase+bath
It does sound like the change of bulb, as Fezza says, but it's pretty mystifying. Hope it settles down and you get it sorted - but I'd beware of leaving the door open slightly unless you have a very secure lock. I'm mentioning this because I've just had an unfortunate experience with a sliding viv door left slightly open - and the snake got out. She's now safely back home but I'm still recovering from the shock. |
|
|
|
|
viperflea
Hatchling
United Kingdom
51 Posts |
Posted - 20/04/2012 : 12:47:32
|
| Really useful tip bats...thanks. I've bought a smaller bulb today with a better reflector so hopefully this will sort out the problem. Yeah I don't like leaving the door slightly open so hoping all will be ok with bulb. |
Viperflea
ROYAL PYTHON - Monty |
|
|
|
viperflea
Hatchling
United Kingdom
51 Posts |
Posted - 22/04/2012 : 12:03:31
|
| Smaller bulb....job done :-) |
Viperflea
ROYAL PYTHON - Monty |
|
|
|
Fezza
Fully Grown Royal
United Kingdom
1063 Posts |
Posted - 22/04/2012 : 12:14:15
|
| Great news |
1.0.0 normal royal
1.0.0 mojave royal
1.0.0 pastel enchi royal
0.1.0 cinnamon royal
0.1.0 pewter royal
0.1.0 genetic stripe royal
0.1.0 lesser goblin royal
0.1.0 phantom royal
0.1.0 Columbian rainbow boa
0.0.1 aru x jaya GTP
0.1.0 bredli
1.0.0 trans pecos rat snake
1.0.0 fat black cat
|
|
|
|
n/a
deleted
7384 Posts |
Posted - 22/04/2012 : 13:14:15
|
Cool! (In every sense lol.) |
|
|
|
| |
Topic |
|
Temperature
