The Royal Python Forum
The Royal Python Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Royal Python Posts
 Royal Python - General Keeping information
 Set-up advice
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Lincsfox
Yearling

121 Posts

Posted - 18/06/2012 :  16:21:41  Show Profile  Reply with Quote
I'm looking at changing my current set-up (heatmat and 60w basking lamp) to a ceramic heater as my cold end temps seem to be too low (32ish in the hot end, 22 is in the cold end). So, a couple of questions.

What size ceramic would I need to heat a viv which is approx 4 x 18in x 2ft?

I currently have a standard on/off stat, would I be better off with a pulse or dimmer stat?

1.0.0 Pastel Royal - Monty
0.1.0 Amel Corn - Connie (Still MIA)
0.1.0 Carolina Corn - Summer
0.1.0 Snow Corn - Ella
0.0.1 Leopard Gecko - awaiting name
1.0.0 Pug - Bentley
1.1.0 Rugrats

JanieW
Old Royal - I Post too much!

United Kingdom
2279 Posts

Posted - 18/06/2012 :  16:48:53  Show Profile  Reply with Quote
I reckon a 200w ceramic with either style stat, 250w would also be fine as the stat will control the temperature :)
A dimmer stat is advised if you ever want to switch to an IR Bulb.



Peoples Of Middle Earth:
Bert (Staffy) , named after Tolkien's stone Troll
Popeye, African Grey
Gimli (Son Of Gloin), Baby Beardie
Slinky, Baby Royal Python
Fëanor..Baby Mexican Common Boa
Casper 2011 Male Ghost Corn Snake **RIP**
Hoard of Orcs (Dubia Roach Colony)
Pearl & Ivory--African Giant Albino Land Snails
Ra, Taiwanese Beauty Snake
Henry, Western Hognose *Missing*
Pippin, Coastal X Diamond Carpet Python
Elanor, Pastel Royal
Timmy, Western Hognose
Flake, Calico male royal, Eowyn, Arabesque Boa
Go to Top of Page

Dixon
Snake Mite

United Kingdom
28 Posts

Posted - 18/06/2012 :  16:50:29  Show Profile  Reply with Quote
I've just set up a similar size viv and and using an 500watt AHS heater and that is keeping my temperatures fine and not running at full pelt so if it gets really cold in the winter I should have plenty in reserve. I'm sure others will come up with other alternatives but I'm happy at present.
Go to Top of Page

JanieW
Old Royal - I Post too much!

United Kingdom
2279 Posts

Posted - 18/06/2012 :  16:53:59  Show Profile  Reply with Quote
I agree with Dixon, the AHS is a great heater, I have one in my 55" setup, but they are costly to buy. If finances allow then the AHS500 is the best you can get:)



Peoples Of Middle Earth:
Bert (Staffy) , named after Tolkien's stone Troll
Popeye, African Grey
Gimli (Son Of Gloin), Baby Beardie
Slinky, Baby Royal Python
Fëanor..Baby Mexican Common Boa
Casper 2011 Male Ghost Corn Snake **RIP**
Hoard of Orcs (Dubia Roach Colony)
Pearl & Ivory--African Giant Albino Land Snails
Ra, Taiwanese Beauty Snake
Henry, Western Hognose *Missing*
Pippin, Coastal X Diamond Carpet Python
Elanor, Pastel Royal
Timmy, Western Hognose
Flake, Calico male royal, Eowyn, Arabesque Boa
Go to Top of Page

chrisc
Old Royal - I Post too much!

United Kingdom
3326 Posts

Posted - 18/06/2012 :  16:54:44  Show Profile  Reply with Quote
as jainew says a 200w would do it, ive got a 3x18x 2ft high viv an the 150w ceramic doesnt get the floor/hot spot up to the right temp without the guard getting red hot so need to get a 200w for that viv.

and as said a pulse or dimmer stat will work fine for ceramic bulbs

not used an AHS yet but heard very good reviews on them but i do have a reptile radiator that works very well but does need spacers to keep it away from the viv roof as it kicks out a lot of heat through the top

1.0.0 burmese python,giblet. 1.0.0 BCI, william. 0.1.0 blue tongue skink, 0.1.0 green iguana, jasmin, 1.0.0 cape house snake, 0.1.0 checkered garter snake

my youtube. http://www.youtube.com/user/pegrocks
incubate 2 campaign
https://www.facebook.com/incubate2

Edited by - chrisc on 18/06/2012 16:57:38
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
The Royal Python Forum © THEROYALPYTHON.co.uk Go To Top Of Page
Snitz Forums 2000